wiki » ATC35L

  We were prompted to write this note because of frequent questions from visitors to our store - they asked about a repair kit for the ATC35L transfer case. Let's start with the facts. ATC35L consists of 68 elements. You can ensure this by looking at the diagram. There are slightly more spare parts in the list, but this is because some spare parts are included in one or more sets. For example, friction and steel plates are not sold separately but are only available as part of a set — another illustration - is the rear flange. For example,...

Here we decided to collect photo and video reports from our clients (and not only) who independently repaired the ATC35L transfer case (BMW xDrive). We assume that this will allow those who are just planning to start restoring their transfer case to avoid mistakes. You can certainly ask questions on the forums to learn something about the repair topic or share your experience. It would also be a good idea to thank the author there. ATC 35L Transfer Case Rebuild @ bimmerpost.com Transfer Case Output Flange Failure, Cause Analysis, Prevention, and Repair @ bimmerpost.com ... and just for aesthetic pleasure:

When replacing the Longitudinal torque module on ATC350, ATC35L, ATC450, ATC45L ensure you install the new unit with a connection bus similar to your previous one. The options are CAN or FlexRay. Below is shown how this can be easily determined by only looking at the actuator (correct: Longitudinal torque module) body which one is yours. FR - means FlexRay busCAN - means CAN bus Important notice about warranty: This complex spare unit requires professional installation and special equipment to reset adaptations after installation. Warranty requests must include written proof of professional installation and evidence that the unit was properly coded during installation....

The author provides detailed instructions on how to replace the rear flange of the BMW transfer case independently. This video illustrates his exemplary attitude to his work.