Noise Symptom/Jerking - Clicking Noise/Rough-Running Engine/Jerking Under Load With Respect to Transfer Case: Programming all-wheel drive control unit/checking transfer case (SY 84/17)
Information
Currently, a high percentage of warranty returned transfer cases are evaluated as "OK" during testing by the supplier.
For this reason, the two previous symptom-based repair instructions are being replaced by these symptom-based repair instructions:
1. => "Eliminating noise symptoms - Re-programming control unit for all-wheel drive (Creaking noise from around the transfer case/SY0416) – => only relevant for vehicles from model year 2015 to 2016 and
2. => "Eliminating symptoms - Engine: Replacing transfer case (Rough-running engine, vehicle jerks under load/SY2516) in Repair Group 39 - Final drive.
Full document
Transfer Cases
-
ATC13 : BMW
-
ATC300 : BMW 3 / 5
-
ATC350 : BMW X1 / 5 / 7
-
ATC35L : BMW 1/2/3/4/5/6/7/X1
-
ATC400 : BMW X3
-
ATC450 : BMW X3 /X5 /X6
-
ATC45L : BMW X3 / X4 / X5 / X6
-
ATC500 : BMW X5
-
ATC700 : BMW X5/X6
-
BW4430 : Audi Q7
-
CB40 (IRD) : Land Rover
-
DCD : Mercedes ML / GL
-
DCS : Mercedes ML / GL / R
-
HAA350+ : VAG
-
HAA450 : VAG
-
Hyundai ATC : Hyundai
-
ITC PLA : Land Rover
-
LX : Chrysler
-
M300+ : VW
-
Macan 95B : Porsche
-
Maserati ATC : Maserati
-
MFA RDM : Mercedes, Infiniti
-
NV125 : BMW X5
-
NV225 : Land Rover
-
NV235 : VAG
-
NV247 : Jeep
-
PL72 ATC : Porsche
-
PL72 T : VAG
-
PQ75+ : VW
-
RDM (312/319) : Fiat
-
SEC : Mercedes S/E/C-class
-
VAA350+ : VAG
-
VG150 : Mercedes
-
VG150 E : Mercedes
-
W61G : Nissan / Infiniti